

According to materials of different particle size, peanut kernel screening machine achieves screening, filter, classification, the whole grain effect. Feed peanut kernels into hopper quantitative continuously and evenly whrn normal working, peanut shells is broken in the rotor strike repeatedly against, friction, collision. Peanut kernels and broken peanut shells through the aperture screen under the rotor rotating wind pressure and blow, first with the big hole screen, after the screening the small fruit change the small holes on the second screen shell, peanut shells of light weight are blown out the machine under the force of rotary fan blowing, peanut kernels through the shaking sieve to clear the purpose of screening.
Place the groundnut machine for peanut kernels on level ground, check whether the fastener is tighten, and rotating parts is flexible or not, each bearing must within lubricating oil before using. Check the power supply should be checked, the switching must be in a disconnected position. When motor is started, the direction of the rotor and machine should be consisted. Before evenly feeding peanuts, idling for a few minutes to observe whether there is abnormal noise to ensure it functions normally. Before open the discharging mouth, feed peanuts blanched, evenly, with right amount until peanuts cover the sieve.
Moisture content of peanuts should be proper, broken rate is high if too dry, the work efficiency will be influenced if too wet. According to peanuts size to chose appropriate screen. If peanut shells accumulate, we can move down the motor, so as to tighten fan belt, increase blow air volume. If we want to deposit machine after using, the dust clean the dirt and internal residual grain should be eliminated. The peanut sieving machine should be placed in dry storeroom, avoid weathered and keep the belt separately. Use diesel to clean each bearing, buttered them after dry, keep the transmission parts and bearing chamber with plenty of lubricating oil.
没有评论:
发表评论